DIY assembly tips for folding wall mount table

The main problem of small-sized apartments is the lack of square meters. Therefore, the most optimal option for such housing is ergonomic furniture. The use of functional and small models in the kitchen is especially important, for example, a folding table with a wall mount will be an excellent solution that will save usable space without compromising on comfort. When folded, it will not interfere with cooking or other manipulations indoors, and when unfolded it will provide a standard place for lunch for the whole family. There are many models of such furniture on the market, so when choosing it, it is important to consider many nuances.

Advantages and nuances of using the design

Folding table with wall mount - countertop fixed with special triangular or rectangular fasteners. When closed, this design looks like a small bar. Unfolded - is a regular dining table, going from the wall.

Such a model of furniture will be quite appropriate in the kitchen or on the balcony. Wall mount tables are popular due to the following advantages:

1. Compactness. Such products when folded do not occupy a large area.
2. Functionality. In the unfolded state, folding tables of wall fasteners perform all the functions of stationary products.
3. Stylish appearance. Models organically fit into almost any interior.
4. Ease of installation. Folding tables with wall mounts are delivered to the buyer ready-made with full instructions. The owner can only fix the product on a vertical surface, which does not require special skills.

A transforming table is more relevant for a kitchen room in which it is not possible to install stationary models, because it folds up and saves usable space. You can install a folding table in the kitchen on any part of the wall, the main requirement is that nothing prevents the product from folding and unfolding freely.

Transformable furniture will not hold fast to drywall constructions.

CompactnessFunctionalityStylish lookEase of installation

Popular varieties

Today folding tables are represented by a wide variety of designs, models, shapes and dimensions. All of them differ in configuration, purpose, style decision. Among the most popular models are:

1. Classic folding wall table. A multifunctional model that can be mounted on any vertical surface of a wall or cabinet. Such a product can withstand increased loads, so it is quite suitable for operation as a workplace. If the furniture is equipped with a massive countertop, the support should be a spacer or at least a few legs. Such products can be used as a balcony or desk, for installing a computer, organizing a workplace for students.
2. Tables with a folding tabletop and an additional cabinet, inside which dishes, products or other necessary trifles can be stored. Among the shortcomings of the model, one can distinguish that such a kitchen table will not be able to withstand heavy loads.
3. Hanging table without legs. This is a very compact furniture that will save maximum space. Externally, the design looks like a shelf with small dimensions.
4. Table transformer. The most functional model, subdivided into wall and wall views. More often, such designs are used as a table for the kitchen. The product is easy to fold, which allows you to turn it into a more compact work surface. Among the assortment there are also adjustable models with additional functions. For the smallest rooms, a wall-mounted table without supports is suitable, which is fastened only with special brackets to a vertical surface. On sale you can find a folding version with one leg.
5. Mobile folding model. It is chosen if it is not possible to fix the product on the wall surface. Such a wall table can be moved along rails that are located on a vertical surface. This option is perfect for non-standard layouts. As a rule, wall tables for the kitchen are equipped with additional supports for stability in a stationary state.
6. The leaning-down bar counter. This model looks like a long narrow tabletop, which is attached to the wall. Racks are made of glass, mirrors, plastic, more dense materials. Such a product can be embedded in a long narrow kitchen.
7. A folding table is the simplest model. It differs from the transformer product in the absence of additional functions.

ClassicalWith hinged worktop and additional cabinetHinged table without legs Folding tableBar counterTransformerMobile folding table

When choosing a model of a folding table against the wall, it is important to correctly determine its dimensions. It should be guided by the parameters in the unfolded state when the countertops recline. It is important to take into account the dimensions of the room, as well as the number of people who should be accommodated at the folding wall table.

Standardly transformed products reach a height of 70-75 cm, this distance is comfortable for sitting.

The following dimensions are suitable for the working area: length - 1.2 m, width - 0.8 m. It is desirable to adhere to these sizes if the product is to be operated as a workplace, in writing.

For a dining table, the norms change:

1. The standard stationary round products are suitable for 4-6 people. They can reach from 110 to 135 cm in diameter. Owners of the folding model must be aware that the edge with which the product is attached to the wall does not have a functional load. Therefore, when calculating seats, the number of people should be reduced by 2.
2. The oval shape can be fixed on the wall in length or across. The number of seats will depend on the type of mount.
3. The rectangular shape of the table is similar to the oval, and the number of seats depends on the method of attachment.

There are parameters that determine the size of a table comfortable for a person - 60 and 40 cm in length and depth, respectively. But the dimensions of the folding models of oval and rectangular shapes often exceed these indicators several times.

RoundOvalRectangular

Materials

In addition to dimensions, the material from which the table is made is important. Most often for the manufacture of such furniture use:

1. Plywood. Popular due to environmental friendliness and low cost. Sheets are obtained by gluing 3 or more veneer sheets with urea resin. It is used both in its natural form and after painting or veneering.
2. Particleboard - the cheapest option, is a plate of wood particles (sawdust, shavings) that are glued with formaldehyde resin. It is easy to process, with the help of veneering and lamination they achieve various textures of the material.
3. MDF - a plate obtained by dry pressing the smallest wood shavings under the influence of high temperatures and pressure. For bonding, carbamide resins, modified melamine are used. When facing, dowels, plastic, and film are used.

The optimal material thickness for the manufacture of folding tables is 19-23 mm. As the lifting mechanism, brackets are most often used, which are fastened with dowels to the wall. Of the fittings, furniture hinges and self-tapping screws are required. From tools it is necessary to prepare a screwdriver and a drill.

PlywoodChipboardMDFNecessary materials and tools

Drawing selection

Before you make a folding table with your own hands, you should choose a folding mechanism. Then you need to draw a diagram of the product. When starting to make a folding table, it is important to correctly create the drawings. Of course, you can try to execute them yourself, but it takes a lot of time, and the likelihood of an error is quite high. Therefore, it makes sense to find a finished drawing on thematic resources and adapt it to the desired dimensions. For this purpose, many sites offer special calculators.

For detailing it is necessary:

1. First transfer the drawing in detail to thick paper.
2. Draw a sketch on plywood. For measurements, use a ruler, square, level.

When the image is fully transferred, you can start cutting parts from the plywood sheet. For this purpose, special equipment will be required. If not, you can contact a specialist. After sawing, the edges of the plywood should be treated with glue around the perimeter, this will help to avoid shedding and destruction of the sheet.

If the material is purchased at a hardware store, it is standard there you can order a sheet cut according to your own sizes.

Self-made step-by-step master class

Wanting to save money, many make a table with their own hands. This is not difficult, but requires compliance with individual requirements.

Kitchen hinged with support on the wall

To make a folding table with your own hands, you will need to prepare plywood sheets, you can also take as a basis chipboard or MDF. Additionally, self-tapping screws, hinges, confirmations and anchors are required.

Production Algorithm:

1. Prepare a drawing of the model and parts separately. Moreover, it is necessary to draw a diagram for the exact dimensions of the future product.
2. For the manufacture of countertops using an electric jigsaw, cut the selected material, giving it the desired shape.
3. Using a grinding machine, process the edges of the product and paste over them with a special tape.
4. Prepare supports. It can be a triangle or a supporting element in the form of the letter P. For a hinged countertop of a small size, a triangular-shaped support is most suitable. It is fixed with a bracket on the wall and hinges to the countertop. Using two slats on both sides, the structure can be strengthened.
5. Secure the triangular support to the rear.
6. Mount the structure to the countertop with hinges.
7. Attach the wall table itself.

A suitable place to install a wall-mounted folding table is the wall next to the windowsill.

Saw the material, giving it the desired shape, process the edges of the product and paste over with a special tapePrepare the supportsPaint parts, fix the triangular support to the back, mount the structure to the countertopAttach a wall table

Writing folding with a cupboard

It is necessary to prepare:

• sheet material for collecting the cabinet box, the thickness of which is at least 16 mm;
• a bar for fixing the structure to the wall;
• particleboard or MDF sheets for countertops;
• strip for mounting the product on the wall;
• wooden bars for the manufacture of supports.

In addition, self-tapping screws, furniture corners, an arm will be required. The manufacturing process itself is not much different from the assembly of a conventional hanging table, because the cabinet is a box without a back wall:

1. The parts are fastened with self-tapping screws and reinforced with metal furniture corners. If desired, shelves and partitions can be fixed inside the cabinet with the help of corners.
2. Saw the countertop according to the size of the box made earlier. They process the edges and fix it to the lower crossbar of the cabinet on the brackets.
3. Collect the U-shaped support from the bars and fix it with loops to the countertop.
4. Make fasteners that will hold the countertop in the assembled state. The table is ready.

Installing such a model does not require a lot of time and effort, the main thing is to choose the right place so that the product does not interfere with folding and folding.

The built-in wardrobe can be exchanged for a conventional rack.

Fasten the parts with screws and reinforce with metal furniture cornersCut the countertop to the size of the box, process the edges and fasten to the crossbar of the cabinetAssemble the support and attach to the countertopMake fasteners, install the structure on the wallIf desired, secure shelves inside the cabinet

Decorating Ideas

The folding surface may well serve as an additional decorative element. Ideas for decorating such furniture:

1. On the reverse side of the countertop, you can put a painting, supplement it with a picture or a panel - when assembled, it will be a stylish decoration of the room.
2. A creative solution would be to supplement such a table with a mirror. In such cases, a mirror surface is mounted on the reverse side of the countertop (the support legs when folded form a frame).
3. In addition, the back of the countertop can be turned into a chalk board or marker. For this, an appropriate coating is fixed on it. Such a surface will become a godsend for creative people, allowing you to conveniently record, and it is also suitable for children's games.

Having shown imagination, from a folding table you can easily get a multifunctional piece of furniture. The reverse side of the countertop can be decorated with an author's photo, an image of a pet, or you can draw your own unique masterpiece there. The main thing is that the homeowners like the decoration.

Making a folding table in the kitchen or in the living room does not require much time, even a novice can take up the installation of the product. However, the final result cannot but rejoice - the product saves space, has a stylish look and is easy to use. A kitchen table of such a sample can act as a working surface for cooking or directly eating. Folding tables - the best solution for small apartments, loggias, kitchens and other small rooms.

Video

Watch the video: How To Make Folding Table at Home. Building a Wall Mounted Folding Desk. DIY table (November 2024).